NetComm N300 - Manual (Page 27)

YML9WMAXXN ADSL2+ Wireless N300 Modem Router with VoIP User Guide
www.netcomm.com.au 27
NetComm Gateway TM Series - ADSL2+ Wireless N300 Modem Router with VoIP
• A proxy is an intermediary program that acts as both a server and a client for the purpose of making requests on behalf of other
clients. Requests are serviced internally or transferred to other servers. A proxy interprets and, if necessary, rewrites a request
message before forwarding it
Use SIP outbound
proxy Select if required by your VoIP provider. Enter SIP Outbound proxy IP and port.
Line 1 & 2 Ports FXS1 & FXS2
Disabled Ticking the checkbox disables the line
Extension The line extension number
Display Name The caller ID display name
Authentication Name The authentication username for the Registrar/Proxy, given by VOIP provider.
Authentication
Password The authentication password for the Registrar/proxy, given by VOIP provider.
5.1.2 SIP ADVANCED
This screen contains advanced SIP configuration settings.
Once settings are configured click Save/Apply to begin using the service.
Line 1 & 2 Ports FXS1 & FXS2
Forwarding number Enter the forwarding phone number
Call forwarding when
busy Tick the checkbox to enable this option
Forwarding all calls Tick the checkbox to enable this option
Call forwarding if no
answer Tick the checkbox to enable this option
Call waiting (default:
enabled) Tick the checkbox to enable this option
NOTE: These options can also be set using telephone keypad commands, as described in the call command list of section 8.2 Telephone Calls
Enable MWI
Subscription Enable or disable Message-Waiting Indicator (MWI) for FXS Phones with this checkbox.
Enable T.38 support
(default: enabled) Enable or disable T.38 Fax mode support with this checkbox. You can plug a fax machine into either phone port
to send or receive faxes. Functionality depends upon FAX support by your VoIP service provider.
Max Digits Sets the maximum number of digits for a phone number.
Emergency Setting Multiple emergency numbers can be set using the “|” character (shift + backslash). For example, to set 911 and
114 as emergency numbers, enter “911|114”.
Please Note: These numbers must be changed to correspond to the emergency numbers that are used in your
location.
Dtmf Relay Setting Set the special use of RTP packets to transmit digit events.
SIP Transport
Protocol Set the special use of SIP protocol to transmit digit events.
Incoming PSTN Call
Routing If PSTN route rule is Auto, an incoming PSTN call will ring an idle phone, either Phone1 or Phone2 (if Phone1 is
busy). If PSTN route rule is Line1 or Line2, an incoming PSTN call will attempt to ring only the assigned phone line
(FXS1 or FXS2).
Enable SIP tag matching Select if required by your VoIP provider. (e.g. disable with Vonage service.)
Enable Music Server Enable/disable the Music Server. Enter the Music Server IP address and port.
5.1.3 SIP DEBUG