NuTone NP51000 - Manual (Page 9)

- 9 -
INSTALL THE
HOOD
Note: at least two people
will be required to mount
the hood.
1. Raise the hood into its
mounting position.
2. Plug the power cord into
the electric wall
receptacle. Tuck
excess cord behind the
flue.
3. Align the rectangular
opening on the back of the hood with the
wall-mounting bracket. Gently lower the
hood until it securely engages the bracket.
Fig. 9
4. Level the hood with (2) screws
(3.9x9.5mm) and secure with (4)
mounting screws (4.8x38mm). Use
drywall anchors provided if wall studs or
framing are not available. Fig. 9
5. Secure the electrical system plate to the
range hood with (2) mounting screws
(3.9x9.5mm). Fig. 10
6. Raise the upper flue until its holes align
with holes in the flue mounting bracket
(located on ceiling). Fig. 11
7. Secure the flue with (2) mounting screws
(3.9x9.5mm). Fig. 11
FIG. 9
3.9x9.5mm
MOUNTING SCREWS
FIG.11
MOUNTING
SCREWS
(4.8x38mm)
RECTANGULAR
CUTOUT
WALL FRAMING
MOUNTING
BRACKET
MOUNTING
SCREWS
(4.8x38mm)
LEVEL
SCREWS
(3.9x9.5mm)
3.9x9.5mm
SCREWS
ELECTRICAL
SYSTEM
PLATE
FIG.10