NetComm Wireless Access Point NP720 - Manual (Page 67)

Wireless Access Point User Guide
64
Using 802.1x Mode (without WPA)
This is very similar to using WPA-802.1x.
The only difference is that on your client, you must NOT enable the setting The key is pro-
vided for me automatically.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the
Access Point.
Figure 52: Properties Screen
Note:
On some systems, the "64 bit" WEP key is shown as "40 bit" and the "128 bit" WEP key is
shown as "104 bit". This difference arises because the key input by the user is 24 bits less than
the key size used for encryption.