NetComm Wireless Access Point NP720 - Manual (Page 110)

Appendix E - Command Line Interface
107
set autochannelselect Set Auto Channel Selection
set basic11b Set Use of Basic 11b Rates
set basic11g Set Use of Basic 11g Rates
set beaconinterval Modify Beacon Interval
set burstSeqThreshold Set Max Number of frames in a Burst
set burstTime Set Burst Time
set calibration Set Calibration Period
set cckTrigHigh Set Higher Trigger Threshold for CCK Phy Errors For ANI
Control
set cckTrigLow Set Lower Trigger Threshold for CCK Phy Errors For ANI
Control
set cckWeakSigThr Set ANI Parameter for CCK Weak Signal Detection Threshold
set channel Set Radio Channel
set cipher Set Cipher
set compproc Set Compression Scheme
set compwinsize Set Compression Window Size
set countrycode Set Country Code
set ctsmode Set CTS Mode
set ctsrate Set CTS Rate
set ctstype Set CTS Type
set domainsuffix Set Domain Name Server Suffix
set dtim Set Data Beacon Rate (DTIM)
set enableANI Turn Adaptive Noise Immunity Control On/Off
set encryption Set Encryption Mode
set extendedchanmode Set Extended Channel Mode
set factorydefault Restore to Default Factory Settings
set firStepLvl Set ANI Parameter for FirStepLevel
set fragmentthreshold Set Fragment Threshold
set frequency Set Radio Frequency (MHz)