NetComm Wireless Access Point NP720 - Manual (Page 31)

Wireless Access Point User Guide
28
Security Settings - WPA2-PSK
This is a further development of WPA-PSK, and offers even greater security, using the AES
(Advanced Encryption Standard) method of encryption.
Figure 18: WPA2-PSK Wireless Security Screen
Data - WPA2-PSK Screen
WPA2-PSK
Network Key Enter the key value. Data is encrypted using a 256Bit key derived
from this key. Other Wireless Stations must use the same key.
WPA Encryption The encryption method is AES. Wireless Stations must also use
AES.
Group Key Update This refers to the key used for broadcast transmissions. Enable
this if you want the keys to be updated regularly.
Key Lifetime This field determines how often the Group key is dynamically
updated. Enter the desired value.
Update Group key
when any membership
terminates If enabled, the Group key will be updated whenever any member
leaves the group or disassociates from the Access Point.
Radius MAC
Authentication The current status is displayed. This will always be "Disabled",
because Radius MAC Authentication is not available with WPA-
PSK. The Configure button for this feature will also be disabled.
UAM The current status is displayed. This will always be "Disabled",
because UAM is not available with WPA-PSK. The Configure
button for this feature will also be disabled.