NAD T562 - Manual (Page 24)

ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
24
The player can always be operated under the same conditions (especially with DVD discs), once the initial
settings have been completed. The settings will be retained in the memory until they are changed, even
if the power is switched off.
1 Press SETUP in the stop or playback mode. The ‘Setup’, ‘Video’ and ‘Audio’ menus are displayed.
2 Press the navigation keys to select the desired setting and press ENTER. Some items require additional
steps. When the RETURN or SETUP key is pressed the screen returns to the Initial Settings display.
3 To exit SETUP menu press RETURN, SETUP, PLAY, or OPEN/CLOSE buttons.
SELECTING LANGUAGES
To select language for DVD audio, DVD menus and OSDs on the TV. Do the following.
1 From the drop-down menu of the OSD, press ENTER to select the Settings menu. A drop-down menu
for ‘OSD’, ‘Audio’, ‘Subtitle’, ‘Menu’, and ‘Text’ will display.
2 Use the navigation keys to select the desired Language and then press the ENTER button on the
remote to store the selection.
INITIAL SETUP SETTINGS
Setup
NOTE
The Audio, Subtitle, Menu, and Text OSD are media specific. Not all media support the various
language options. Refer to the specific media documentation for available features. Refer to the
section ‘REFERENCE’, ‘Table of Languages and Their Abbreviations’ for available languages and their
codes.
T562 IM english 23/7/02 9:43 am Page 24