Defining your default feature, Prerequisites, Assigning the outbox to a key – Nortel Networks IP Phone 2001 User Manual
Page 66
66
Using the Feature menu
6
Perform one of these steps.
•
To enable Auto Hide, select Enable.
•
To disable Auto Hide, select Disable.
7
Press Ok.
A check mark appears beside the item to indicate if the feature is
enabled or disabled. You return to the Options menu.
--End--
Defining your default feature
Follow this procedure to assign a feature to your default soft key.
Prerequisites
You must be logged on.
Procedure Steps
Step
Action
1
From the main menu, open the Settings menu.
2
From the Settings menu, open the Call menu.
3
From the Call menu, open the Feature menu.
4
From the Feature menu, select Options.
5
From the Options menu, select Default Feature.
6
Press Ok.
The Default Features screen appears, showing a list of soft keys.
7
Scroll through the list to select the key that you want to assign as
your default feature key.
8
Press Ok.
The selected key is now your default feature key. You return to
the Options menu.
--End--
Assigning the Outbox to a key
Follow this procedure to assign the Outbox to a soft key.
Prerequisites
You must be logged on.
Carrier VoIP
Nortel IP Phone 2001 User Guide (CICM)
NN10300-005
09.01
Standard
4 July 2008
Copyright © 2008 Nortel Networks
.