NETGEAR MR814v2 - Manual (Page 41)

Reference Manual for the MR814v2 Cable/DSL Wireless Router
Wireless Configuration 3-5
Figure 3-5: Wireless Card Access List Setup
Then, either select from the list of available wireless cards the MR814v2 has found in your
area, or enter the MAC address and device name for a device you plan to use. You can usually
find the MAC address printed on the wireless adapter. When you click Add, you are returned
to the Wireless Card Access List screen.
Figure 3-6: Apply Wireless Card Access List
Be sure click Apply to implement and save your settings.
Now, only devices on this list will be allowed to wirelessly connect to the MR814v2. This prevents
unauthorized access to your network.