Safeharbour tunnel setup – Netopia 6.3 User Manual
Page 77
77
Section 4
Configure
SafeHarbour Tunnel Setup
Use the following tasks to configure an IPSec VPN tunnel on your Cayman
Gateway.
Task 1: Ensure that you have SafeHarbour VPN enabled.
SafeHarbour is a keyed feature. See
for information concerning
installing Cayman Software Feature Keys.
Task2: Complete Parameter Setup Worksheet
IPSec tunnel configuration requires precise parameter set between VPN
devices. The Setup Worksheet facilitates setup and assures that the associ-
ated variables are identical.
Task 3: Enable IPSec
IPSec must be enabled on your Gateway to allow further VPN configura-
tion. Perform the following steps to enable IPSec:
Step 1
Browse to Gateway.
Step 2
Click the
Security
toolbar button.
Step 3
Click the
IPSec
link.
Step 4
Check the
Enable SafeHarbour IPSec
checkbox.
Checking this box will automatically display the SafeHarbour IPSec Tunnel
Entry
parameters.