Netopia 6.3 - Manual (Page 114)

114
Appendix A SHELL Commands
Displays the DHCP leases stored in NVRAM by your Cayman Gateway.
Displays DSL port statistics, such as upstream and downstream connection rates
and noise levels.
Displays the Ethernet statistics for your Cayman Gateway.
Show all keyed features and whether or not they are enabled. If the key is not per-
manent, it shows the expiration date.
Displays the IP address and (computer) host name in the host name table for each
LAN-side computer. The host name table is built by the Gateway as its DHCP
server serves IP addresses to LAN-side computers trying to access the WAN
through the Gateway.
Displays the Ethernet address resolution table stored in your Cayman Gateway.
Shows statistics for the BreakWater Firewall.
Displays the contents of the IGMP Group Address table and the IGMP Report
table maintained by your Cayman Gateway.
Displays the IP interfaces for your Cayman Gateway.
Shows statistics for the SafeHarbour IPSec tunnel.
Displays the IP routes stored in your Cayman Gateway.
Displays blocks of information from the Cayman Gateway diagnostic log. To see
the entire log, you can repeat the show log command or you can enter show
log all.
BOTH show dhcp server store
DSL show dsl
BOTH show enet
BOTH show features
BOTH show hosts
BOTH show ip arp
BOTH show ip firewall
BOTH show ip igmp
BOTH show ip interfaces
BOTH show ip ipsec
BOTH show ip routes
BOTH show log