Niles Audio SW10JM User Manual

Page 27

Text mode
Original mode

NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373

5. Secure the brackets to the studs using the

provided hardware.

6. Make necessary wire connections to

terminal cups

NOTE: THE SW10WM CABINET HAS THE
NECESSARY TRIMOUT PANEL ALREADY
INSTALLED. THIS WILL ALLOW SHEETROCK
INSTALLERS THE EXACT LOCATION FOR
CUTTING THE FRAME OPENING AND PREVENT
DEBRIS FROM ENTERING THE CABINET DURING
THE FINAL PHASES OF CONSTRUCTION.

Installation Package

8. Remove Trim Out Panel from the cabinet

and discard.

9. Remove the Bafﬂe/Driver from its packaging.

10. Connect the appropriate speaker wires from

inside the cabinet to the Push terminal on the
back of the subwoofer basket. If using the
terminal cups at the top, use the top wires. If
using the terminal cups at the button, use the
button wires.

11. Insert the Bafﬂe/Driver into the hole securing

the bafﬂe in place with the supplied screws.

SW10WM IN-WALL INSTALLATION

(CONTINUED)