Niles Audio SW10JM - Manual (Page 13)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI or 1-305-238-4373
11
4. Attach the supplied front and rear brackets to the
2 x 4’s using the supplied 1.5" screws.
NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM
PORT. THE STOP BLOCK IS INCLUDED TO PREVENT
THE SUBWOOFER FROM DISENGAGING FROM
BRACKETS UNTIL THE GRILLE IS INSTALLED.
5. Place the SW10JM subwoofer into the brackets
aligning the attachment pins to the slots in the
brackets. Begin with the ported end first.
6. Install the stop block between the bracket
and cabinet at rear of cabinet as indicated
in drawing.
Screw
Subwoofer
Stop Block
Screw
Stop Block
Subwoofer
Front Bracket Rear Bracket Subwoofer
Front Bracket
Rear Bracket
Screws
2 x 4
2 x 4
SW10JM INSTALLATION – FLOOR APPLICATION
(CONTINUED)