Installation & configuration, Nti nodemux multi-user universal kvm switch 7, Figure 2- connect monitor to nodemux – Network Technologies ST-nXm-U User Manual
Page 11: Rear view of nodemux
NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
7
INSTALLATION & CONFIGURATION
Power OFF all CPUs that will be connected to the NTI Switch before connecting or disconnecting any cables.
WARNING!
CPUs may be damaged if cables are connected or disconnected while power is ON.
1. Connect the monitors to the ports labeled "MONITOR x" on the rear of the NODEMUX.
Figure 2- Connect monitor to NODEMUX
Rear View of NODEMUX
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 6
VIDEO 7
VIDEO 8
VIDEO 9
VIDEO 10
VIDEO 11
VIDEO 12
VIDEO 13
VIDEO 14
VIDEO 15
VIDEO 16
USER 1
USER 2
USER 3
USER 4
R
S
2
3
2
NTI
NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999
1275 Danner Dr
Aurora, OH 44202
www.nti1.com
R
CPU 1
CPU 2
CPU 3
CPU 4
CPU 5
CPU 6
CPU 7
CPU 8
CPU 9
CPU 10
CPU 11
CPU 12
CPU 13
CPU 14
CPU 15
CPU 16
15HD Male
Video Connector
15HD Female
Video Connector
VGA
Multi-Scan
Monitor
MONITOR 1