Nortel Networks Instant Internet 400 Unit - Manual (Page 44)

44 Chapter 4 DIP switch settings
300867-G
Switch settings for special configurations
During the power-up sequence, your Instant Internet 400 unit checks the settings
of the switches. You can use the switches on your unit to:
• Reset the password (Table 11) , which is useful if you forget the password.
• Reset the password and other user-defined system configuration (Table 12) .
• Disable the switch settings for resetting the password and user-defined
configurations
(Table 13) .
• Restore the original default factory settings (Table 14) .
Table 11 shows the switch settings for resetting your unit’s password.
Table 12 shows the switch settings for resetting your unit’s password as well as
some user-defined configurations.
Table 11 Switch settings for resetting the password
1 2 3 4 5 6 7 8
ON • • • • •
OFF • • •
Table 12 Switch settings for resetting the password and user-defined
configurations
1 2 3 4 5 6 7 8
ON • • • • •
OFF • • •
Caution: If you use these switch settings to restore your unit, the
following user-defined settings are removed or reset: password, hosts,
port mappings, and unit configuration.