Net Optics Smart Filtering none User Manual
Page 48
44
*** Confidential - DO NOT Distribute ***
Director
Command Sub-Command Parameters
Example and description
filter
(continued)
list
ipv6=< y | n >
filter list
Parameters:
ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
dressing (defaults to IPv4 if parameter is omitted)
Displays all pending filters (with filter IDs)
running
ipv6=< y | n >
filter running
Parameters:
ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-
dressing (defaults to IPv4 if parameter is omitted)
Displays all active filters
sync
filter sync
Loads the pending filter list with a copy of the currently
active filters
help
help filter
Parameter:
Displays information about the specified CLI command;
if
commands
history
history
Displays a numbered list of previously executed CLI
commands; any command can be executed directly
by entering the command number preceded by an
exclaimation point; up- and down-arrow keys can be
used to scroll through the command history buffeer
(see ! command)
image
< 1 | 2 >
image 2
Parameter:
Valid values are 1 and 2
Chooses which system image to boot from; if
is omitted, the current system image information is
displayed (see upgrade command)
list
list
Shows a list of filenames of saved Director device
configurations (see save command)
load
load my_configuration-1
Parameters:
string;
do not include an extension
Loads a previously saved Director configuration (see
save command)
logout
logout
Exits the CLI shell (same as exit and quit)
module
show
module show
Lists information about Director hardware modules
including system serial number, DNM types, and
XFPs