Net Optics Smart Filtering none - Manual (Page 46)

42
*** Confidential - DO NOT Distribute ***
Director
Appendix B
Command Line Interface
Tip! ___________________________________________________________________________________________________
The command line interface (CLI) is not case sensitive.
________________________________________________________________________________________________________
Port numbering:
Network ports are numbered Ns.p where •
s is the DNM module (1 or 2; 1 is on the left, 2 is on the right) •
p is the port number within the DNM (1 through 12) •
for example, n2.1 and n2.12 are the lowest and highest port numbers in the second DNM Monitor ports are •
numbered m.1 through m.10
Configurable 10 Gigabit ports are numbered t.1 and t.2 •
a • portlist is a list of ports separated by commas; dashes may be used to specify ranges; for example,
n1.1,n1.2,n1.3 and n1.1-n1.3 mean the same thing; NOTE: Do not include any space characters in the list (do
not put a space after the comma)
A string is a string of characters up to 32 characters in length, not case sensitive; valid characters are A-Z, a-z, 1-9, -, _
Parameters marked with an asterisk (*) are required, and must be the first parameter in the parameter list for the command.
Other parameters are optional and may be included in any order.
Command Sub-Command Parameters Example and description
! [#] (a number) !3
Executes a command from the CLI command history
buffer
(see history command)
commit commit
Activates pending changes previously defined using
filter commands; same as a filter commit command
date date 06/24/2008
Parameters:
is mm/dd/yyyy
Sets the system calendar date; if is omitted,
the current date is displayed
del * del my_configuration-1
Parameters:
is the name of the file to delete; a
string; do not include an extension
Deletes a previously saved Director configuration file
(see save command)
exit exit
Exits the CLI shell (same as logout and quit)