Nikon Capture 4 - Manual (Page 128)

124
The Camera Control Window
Camera Settings That Can Not Be Adjusted from Nikon Capture
The following operations can not be performed from Nikon Capture 4 Camera Control:
Operation Camera
St
at
us
n
ot
d
isp
la
ye
d
Burst photography (continuous shooting mode) D1-series / D100
Continuous servo autofocus All supported models
Pressing the shutter-release button halfway to check focus All supported models
Autofocus-only operation (use AF and Shoot to perform autofocus) All supported models
Manual aperture adjustment using the lens aperture ring D2-series / D1-series/D200
Reactivating the camera after it has entered sleep mode D1-series
Depth-of-fi eld preview All supported models
Auto bracketing D1-series / D100
Compression options for NEF (RAW) images D100
Operation assigned to FUNC. button with Custom Setting f4 D2-series/D200
Remote (D70s, D70, and D50 only) and self-timer mode selection
D2-series/D200/ D70s/D70/
D50
St
at
us
d
isp
la
ye
d
Focus mode selection using camera focus-mode selector All supported models
Metering D1-series / D100
Exposure mode (can be adjusted if Enable controls on camera
body is selected when D70s, D70, or D50 is connected)
D100 / D70s/D70/ D50
Shooting mode D100
Shutter-speed lock D2-series / D1-series
Aperture lock D2-series / D1-series
Autoexposure lock All supported models
Speedlight fl ash-level compensation D2-series/ D1-series
M-
UP
(mirror up) mode selection D2-series/D200
Selection of second center focus area group in group dynamic-AF mode D2-series/D200
Simulated LCD Panel
This panel shows the information displayed in the camera’s viewfi nder, with the ex cep tion
of camera errors. Clicking on an indicator in the panel opens the Nikon Capture 4 Camera
Control window to the tab that controls the selected option, where ad just ments can be
made.
When a D2-series, D200, D70s, D70, or D50 camera is connected, the amount of memory
remaining in the camera memory buffer is displayed at the right edge of the simulated LCD
panel. This information is updated at regular intervals, but temporary discrepancies may exist
between the display and the actual amount of memory remaining in the buffer.
Shoot Buttons
Click either of these buttons to take a photograph at current settings. If a D2-series, D200,
D70s, D70, or D50 camera is connected, photos can be taken in continuous shooting mode
( 128); in this case, the
AF and Shoot and Shoot buttons will instead be labeled AF and
Start and Start.
• AF and Shoot / AF and Start: When this button is clicked, the camera will perform an auto-
focus and then re lease the shut ter to take a pho to graph.
• Shoot / Start: Click this button to take a photograph. If the selected focus mode is single-
servo AF, an autofocus operation will be performed before the shut ter is released.