Nortel Networks MOBILE COMMUNICATION CLIENT 3100 - Manual (Page 20)

Installing your MCC 3100 for Windows Mobile
20 NN42030-107 MC 3100 3.0 Standard 02.02 November 2008
• “Installing the software over the air” on page 22
• “Upgrading the software over the air” on page 24
Consult your system administrator for the preferred installation or
upgrade method.
Note 1: Disable sleep mode during the installation process.
Note 2: Before beginning the installation process, ensure that your
device has at least 10 MB of free hard drive space. If not, you will
have to quit the installation to free up additional space. You can add
more space by deleting unnecessary files or reducing the size of the
Internet Explorer cache.
Note 3: If you are upgrading from an earlier release, you must
perform an initial software installation, not an upgrade. After the
installation, update the Server IP/Host address on the Login
Information screen if instructed to do so by your system administrator.
Installing or upgrading from a computer
With this method, you add the software to your computer, connect your
computer to the mobile device with a USB cable, and then install the
software by using Microsoft ActiveSync.
To verify that the data connection between MCC 3100 for Windows
Mobile and Mobile Communication Gateway 3100 (MCG 3100) is
established, see
“Data connection between MCC 3100 for Windows
Mobile and MCG 3100” on page 103 .
See Table 4 "Software files" on page 20 to choose the software for
your mobile device.
Table 4: Software files
OS Form factor Software file
WM5 Pocket PC DesktopInstall-MCC3100-en-
WindowsMobile5-Pocket-PC-single.zip
WM5 Smartphone DesktopInstall-MCC3100-en-
WindowsMobile5-Smartphone-single.zip