Nokia XpressMusic 5700 - Manual (Page 92)

92 Copyright © 2007 Nokia. All rights reserved.
C o n n e c t i v i t y
GPRS network. PTT provides direct voice communication
connected with a single keypress.
Before you can use the PTT service, you must define the PTT
access point and PTT settings.
In PTT communication, one person talks while the others
listen. Speakers take turns responding to each other. Only
one group member can talk at a time. The length of time
of each turn is limited.
Phone calls always take priority over PTT calls.
Besides the packet data counters, the phone registers only
one-to-one calls in the recent calls lists in
Log . The
participants should confirm the reception of any
communications where appropriate as there is no other
confirmation of whether the recipients have heard the call.
To check availability and costs, and to subscribe to the
service, contact your service provider. Note that roaming
services may be more limited than home network services.
Many of the services available for traditional voice calls
(for example, call mailbox) are not available for PTT
communications.
Define a PTT access point
Many service providers require you to use an internet
access point for your default access point. Other service
providers allow you to use a WAP access point.
Settings for PTT
For PTT service settings, contact your service provider.
To view and change PTT settings, select Menu > Settings
> Connectivity > PTT > Options > Settings > User
settings or Connection settings .
User settings
Accepted list calls —To see a notification of incoming calls,
select Notify . To answer PTT calls automatically, select
Auto-accept . If you do not want to receive PTT calls, select
Not allowed .
PTT call alert tone —Select the tone for incoming PTT calls.
If you want the incoming call alert setting for PTT to follow
your profile settings, select
Set by profile . For example, if
your profile is silent, PTT is set to do not disturb (DND) and,
except for callback requests, you are not available to
others using PTT.
Callback request tone —Select a tone for callback
requests.
Application start-up —To start PTT automatically, select
Always automatic . To start PTT automatically only while in
your home network, select Auto. in home netw. .
Default nickname —Enter your nickname shown to other
users. Your service provider may have disabled the editing
of this option.