Nokia 702 - Manual (Page 38)

Contacts (Phonebook)
38
Add ringing tones for contacts
When a contact or group member calls you, the phone
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and the device recognises it).
Tip: Speed dialling is a quick way to call
frequently used numbers. You can assign speed
dialling keys to eight phone numbers. See
"Speed dial a phone number" on page 30.
1 Press to open a contact, or go to the groups list,
and select a contact group.
2 Select Options > Ringing tone . A list of ringing tones
opens.
3 Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
If a ringing tone has been set for a contact group, and
then a contact is added to the group, the group’s ringing
tone will not be applied to the added contact.
Voice dialling
You can make a phone call by saying a voice tag that has
been added to a contact. Any spoken words can be a voice
tag.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the voice tag exactly as you said it when
you recorded it.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names and
avoid similar names for different numbers.
Note: Using voice tags may be difficult in a
noisy environment or during an emergency, so
you should not rely solely upon voice dialling in
all circumstances.