Nokia 702 - Manual (Page 109)

Tools
109
Date and time
See "Clock settings" on page 22.
See also the language settings in "General" on page 103.
Security
Phone and SIM
PIN code request —When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See "Glossary of PIN and
lock codes" on page 110.
PIN code , PIN2 code , and Lock code —You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0—9. See "Glossary of PIN and
lock codes" on page 110.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period —You can set an autolock period, a time-
out after which the device automatically locks and can be
used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select
None to
turn off the autolock period.
To unlock the device, enter the lock code.
Note: When the device is locked, calls in
offline profile to certain emergency numbers
programmed into the device are still possible.
In this situation, calls to 110, 118 and 119 may
not be possible depending on your USIM card.
In that case, please set this option off and
make calls with these numbers in accordance
with "Emergency calls" on page 148.
Tip: To lock the device manually, press . A list
of commands opens. Select Lock phone .
Lock if SIM changed—You can set the phone to ask for
the lock code when an unknown SIM card is inserted into
the device. The device maintains a list of SIM cards that
are recognised as the owner’s cards.