National Instruments 800 Series User Manual
Page 103
Index
Index-4
© National Instruments Corporation
O
ONLINE LED, 1-6, C-1
P
parallel port
connector and signals, D-8 to D-9
DMA level, PC configuration, 3-12
PC configuration, 3-10 to 3-13
Ethernet power-on defaults, 3-13
GPIB interrupt level, 3-11
parallel port DMA level, 3-12
SCSI termination, 3-11
system CMOS, 3-12
PCI expansion slot, 2-4
PCI interrupts, B-1
PCI plug-in boards, length of
VXIpc-850 plug-in boards, E-2
VXIpc-860 plug-in boards, E-5
PCMCIA interface, 2-3
peripheral expansion. See I/O expansion
boards.
peripherals overview (table), 1-8
physical specifications, A-2
plug-in boards. See I/O expansion boards.
Q
questions and answers about VXIpc 800
Series, F-1 to F-4
R
RAM
adding RAM, A-5
installed system RAM, 3-10
RX LED, 1-7, C-3
S
SCSI interface
common questions and answers, F-2, F-4
connector and signals, D-10 to D-11
overview, 2-4
setting up in BIOS, F-2
termination, PC configuration, 3-11
serial port connectors and signals, D-6 to D-7
signals
COM1 and COM2 connectors
(table), D-7
Ethernet connector (table), D-6
GPIB (IEEE 488.2) (table), D-13
keyboard connector (table), D-3
parallel port (table), D-9
SCSI interface (table), D-11
SMBs
characteristics (table), D-16
connector signals (table), D-14
speaker characteristics (table), D-16
VGA connector (table), D-4 to D-5
VXIbus P1 and P2 (table), D-17 to D-20
Slot 0 functionality
configuration as Slot 0 or non-Slot 0,
3-4 to 3-5, F-3
installation of VXIpc-800 (warning), 3-13
overview, 1-4
SMB
connector location and pinout
(figure), D-14
signals
characteristics (table), D-16
connector signals (table), D-14
SMB CLK10 direction (figure), 3-6
SMB CLK10 polarity (figure), 3-7
SMB CLK10 termination (figure), 3-7
trigger input termination (figure), 3-8
software, optional, 1-3 to 1-4