Nokia M10 - Manual (Page 88)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-39
Command Download configuration file
Description Downloads a configuration file from a TFTP server.
Syntax download [server-ipaddress] [filename] {confirm}
Arguments server-ipaddress is the IP address of the TFTP
server. filename is the name of the configuration file.
If invoked as download with no arguments, you will be
prompted for information. If the optional confirm key-
word is added, the transfer will proceed without further
questions.
Example M10> download 1.12.123.123 config1.cfg
***WARNING*** YOU ARE ABOUT TO DOWNLOAD A
CONFIGURATION FILE.
About to download configuration file:
server: 1.12.123.123
file: config1.cfg
Do you wish to proceed? (type ’yes’ to
confirm):yes
Downloading
Downloading file into RAM
File Download was successful
Replace existing configuration with down-
loaded configuration? (type ’yes’ to con-
firm):yes
172.16.0.0 has been added to the
list
Configuration data saved.
M10>
Command Upload configuration file
Description Uploads a configration file to a TFTP server.
Syntax upload [server-ipaddress] [filename] {confirm}
Arguments server-ipaddress is the IP address of the TFTP
server. filename is the name of the configuration file.
If invoked as upload with no arguments, you will be
prompted for information. If the optional confirm key-
word is added, the transfer will proceed without further
questions.
Example M10> upload 1.12.123.123 config2.cfg con-
firm