Nokia M10 - Manual (Page 78)

Management
DRAFT
E Copyright Nokia Telecommunications Oy NTC C33539002SE_A0 5-29
Command ATM ping
Description Sends 5 OAM F5 loopback cells to the specified VPI/
VCI destination with a 5 second total timeout interval.
Syntax atmping [vpi] [vci] [segment | end-to-end]
Arguments vpi and vci specify the channel and the third argu-
ment specifies segment or end-to-end loopback.
Example m10> atmping 0 100 segment
Command Exit
Description Exits the Nokia M10 command line interface.
Syntax quit
Arguments None.
Example M10> quit
Command Reset ATM statistics
Description Resets ATM statistics to zero.
Syntax reset atm
Arguments None
Example M10> reset atm
Command Clear crash information
Description Clears crash-dump information which identifies the con-
tents of M10 registers at the point of system malfunc-
tion.
Syntax reset crash
Arguments None.
Example M10> reset crash