National Instruments GPIB-PC - Manual (Page 103)

BASICA/QuickBASIC GPIB-PC Function Calls Section Four A
GPIB-PC User Manual 4A-28 ©National Instruments Corp.
Board Examples:
1. Program the interface board BRD0% to terminate a read on
detection of the linefeed character (&H0A) that is expected to
be received within 200 bytes.
10 EOSV% = &H0A
:
:
100 V% = EOSV% + &H0400
110 CALL IBEOS (BRD0%,V%)
120 REM Assume board has been addressed; do
130 REM board read.
140 RD$ = SPACE$(200)
150 CALL IBRD (BRD0%,RD$)
160 REM The END bit in IBSTA% is set if the
170 REM read terminated on the EOS
180 REM character. The value of IBCNT%
190 REM shows the number of bytes received.
2. To program the interface board BRD0% to terminate read
operations on the 8-bit value &H82 rather than the 7-bit
character &H0A, change lines 10 and 100 in Example 1.
10 EOSV% = &H82
:
:
100 V% = EOSV% + &H1400
:
:
3. To disable read termination on receiving the EOS character for
operations involving the interface board
BRD0% , change line
100 in Example 1.
:
:
100 V% = EOSV%