NETGEAR Cable/DSL ProSafe Firewall FR328S - Manual (Page 18)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
2-4 Introduction
M-10207-01, Reference Manual v2
• Browser-based management
Browser-based configuration allows you to easily configure your firewall from almost any
type of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup
Wizard is provided and online help documentation is built into the browser-based interface.
• Remote management
The firewall allows you to log in to the browser-based management interface from a remote
location via the Internet using SSL encryption. For security, you can limit remote management
access to a specified remote IP address or range of addresses, and you can choose a
nonstandard port number.
• Smart Wizard
The firewall automatically senses the type of Internet connection, asking you only for the
information required for your type of ISP account.
• Diagnostic functions
The firewall incorporates built-in diagnostic functions such as Ping, DNS lookup, and remote
reboot. These functions allow you to test Internet connectivity and reboot the firewall. You can
use these diagnostic functions directly from the FR328S when your are connected on the LAN
or when you are connected over the Internet via the remote management function.
• Visual monitoring
The firewall’s front panel LEDs provide an easy way to monitor its status and activity.
• Flash EPROM for firmware upgrade
What’s in the Box?
The product package should contain the following items:
• FR328S ProSafe Firewall with Dial Back-Up
• AC power adapter
• Category 5 (CAT5) Ethernet cable
• Resource CD (SW-10045-01), including:
— This manual
— Application Notes, Tools, and other helpful information
• Warranty and registration card
• Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.