Nortel Networks NB5PLUS4/W - Manual (Page 82)

NB5Plus4/W User Guide YML754Rev1
www.netcomm.com.au
Period: The number of beacon frame
transmissions before frames, targeted
for stations operating in low-power
mode will be transmitted
RTS threshold Request To Send The number of bytes
in an MPDU below which an RTS/CTS
handshake will not be performed. The
default value is 2347, however, when 4x
is enabled on the setup page, the RTS
threshold value changes to 4096.
Frag­men­tation­ Threshold The minimum length of a frame that
will be fragmented. The default value
is 2346, however, when 4x is enabled
on the setup page, the fragmentation
threshold value changes to 4096.
Power Level The TX Output power percentage com-
paring to the maximum TX power: full,
50%, 25%, 12%, and 6%.
Option Description
Multi Domain­ Capability This feature can only be configured on a
hidden page. It is not recommended for
the end users to configure this feature.
Please call NetComm support should you
need to change any of these settings.
Coun­try Strin­g­ Please call NetComm support should you
need to change any of these settings.
Curren­t Reg­. Please call NetComm support should you
need to change any of these settings.
Private Reg­. Please call NetComm support should you
need to change any of these settings.