Nortel Networks NB5PLUS4/W - Manual (Page 48)

NB5Plus4/W User Guide YML754Rev1
4 www.netcomm.com.au
0x4 2 Maximize Reliability 0 Best Effort 2
0x6 3 mmc+mr 0 Best Effort 2
0x8 4 Maximize Throughput 2 Bulk 1
0xa 5 mmc+mt 2 Bulk 1
0xc 6 mr+mt 2 Bulk 1
0xe 7 mmc+mr+mt 2 Bulk 1
0x10 8 Minimize Delay 6 Interactive 0
0x12 9 mmc+md 6 Interactive 0
0x14 10 mr+md 6 Interactive 0
0x16 11 mmc+mr+md 6 Interactive 0
0x18 12 mt+md 4 Int. Bulk 1
0x1a 13 mmc+mt+md 4 Int. Bulk 1
0x1c 14 mr+mt+md 4 Int. Bulk 1
0x1e 15 mmc+mr+mt+md 4 Int. Bulk 1
The Default queue priority for non-mapped TOS values is Best Effort.
Advanced>LAN Clients
LAN Client names are a way of applying specific Port-forwarding and Access Con-
trol rules to individual computers on the LAN. If DHCP is used, all DHCP clients are
automatically assigned and are designated as a LAN client.
To add a LAN client, click Advanced>LAN Clients.
Option Description
Select LAN Group: Select the LAN group you would like to
add a LAN client to.
En­ter IP Address: Enter the IP address of the LAN client to
be added.
Hostn­ame: Enter the Hostname.
MAC Address: Enter the MAC address of the new cli-
ent. To find out the MAC address of the
client, open a command prompt and
execute an ipconfig/all command (Win-
dows 2000/XP). Note, it is optional to
add the MAC address of the device. The
format to add the MAC address is xx:xx:
xx:xx:xx:xx.
Apply: Click Apply to save the changes.
Advanced > LAN Isolation