Nokia DNT2Mi-fp - Manual (Page 9)

Introduction to DNT2Mi-fp
DN0445814 © Nokia Corporation 9 (60)
Issue 2-0 en Nokia Proprietary and Confidential
2
Introduction to DNT2Mi-fp
Nokia DNT2Mi-fp is a fixed port data access network terminal intended for
customer premises. It provides a two-wire or four-wire SHDSL line interface
(ITU-T G.991.2) and symmetrical 2M data interface (ITU-T G.704).
The DNT2Mi-fp Data Network Terminal can be used for example for BTS and
PABX (E1) connections (see Figure 2). DNT2Mi-fp can be controlled,
configured, and tested using Nokia’s common network management system
(NMS). It can also be controlled locally using MSTE or Craft Terminal running
on a PC or ST (hand held service terminal).
Figure 2. Example of DNT2Mi-fp connection
PABX
Local
Exchange
SHDSL
DNT2Mi-fp
BSC
BTS
DNT2Mi-fp
PDH
Network