Nokia DNT2Mi-fp - Manual (Page 14)

DNT2Mi-fp Data Network Terminal User manual
14 (60) © Nokia Corporation DN0445814
Nokia Proprietary and Confidential Issue 2-0 en
4.1 Line interface
Figure 6. Line interfaces of DNT2Mi-fp
4.2 Power supply
DNT2Mi-fp can be fed with either, 48VDC or remotely via ACL2i through the
line. It is also possible to use a AC to DC converter (110/230VAC to 48VDC) to
feed power to the DNT2Mi-fp.
1 - 6
6-pin modular jack, RJ-11
DSL Line
1.
2.
3.
Not connected
4. Not connected
5.
6.
Pin
Line 1a
Line interface
Line 1b
Line 2a (not in use in 2-w mode) *)
Line 2b (not in use in 2-w mode) *)
*) not connected in T65690.01