First, assemble and mount the antenna, First, assemble and mount the antenna -2 – NETGEAR ANT2409 User Manual

Page 14

Installation Guide for the 9 dBi Omni-directional Antenna ANT2409

2-2

Installing the 9 dBi Omni-directional Antenna

First, Assemble and Mount the Antenna

Figure 2-1: Antenna Assembly and Mounting

Step

Procedure

Step 1

Feed the antenna cable through the antenna
mounting assembly.

Note: Use the correct cable.
• Outdoors: use the provided 2m antenna

cable.

• Indoors: use the provided N/SMA adapter

with a Netgear

cable model

ACC-10314-01, 02, 03, 04 or 05 (sold
separately). For indoors, d

o not use the

provided 2m cable.

Step 2

Securely attach the antenna cable by screwing
it onto the antenna.

Step 3

Insert the antenna into the mounting assembly.

Step 4

Position the key slot on the antenna so that it
is aligned with the mounting screw hole
illustrated in step 5.

Step 5

Tighten the mounting screw so that it fits in the
key slot on the antenna.

Step 6

Attach the assembled antenna to the mounting
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).

Note: The antenna can be mounted vertically
right-side-up or up-side-down.

#ABLE

3TEP