Nikon DSR-1500AP - Manual (Page 83)

83
Connections for an A/B Roll Editing System
Ch
apt
er 5
Con
nec
tions
and
S
e
ttin
gs
Connections for an A/B Roll Editing System
The following is an example configuration of A/B roll
editing system using the DSR-1500A/1500AP.
Notes
• This application requires the DSR-1500A/1500AP unit
used as the recorder to be fitted with the optional DSBK-
1505 board.
• The DSR-1500A/1500AP units shown in the following
figure are fitted with the optional DSBK-1501 and
DSBK-1505 boards.
• When using the DSR-1500A/1500AP unit as the
recorder for insert editing in 4-channel audio mode, the
allowable audio insert channel selection is limited to one
of 1/2ch, 3/4ch, and 1/2/3/4ch.
The purpose of the following figure is to indicate the flow
of signals among the component devices in the system.
The specific connections and settings are described
beginning on page 85.