Nikon DSR-1500AP - Manual (Page 76)

76
Changing Menu Settings
C
h
ap
te
r 4
M
e
nu
S
e
tti
n
gs
2
With “SETUP MENU” selected, press the G button.
This displays all basic and enhanced items on menu
level 1.
3
Follow the same procedure as in steps 3 to 8 of the
procedure in the section “Changing the Settings of
Basic Items” (page 73) using the fFgG buttons to
select an item and change its setting.
4
When you have completed the settings, press the SET
(YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the new settings are saved in
memory.
When the saving operation is completed, the monitor
screen and time counter display return to their normal
indications.
Returning Menu Settings to Their
Factory Default Settings
After making menu setting changes, to return settings to
their factory default settings (setting initialization), use the
following procedure.
To return a particular setting to its factory
default setting
In the section “Changing the Settings of Basic Items”
(page 73), carry out the procedure up to step 6, then with
the current setting displayed (in the example, if the factory
default setting has been changed, the current setting will be
100% or 50%), proceed as follows.
1
Either press the RESET (NO) button or select the
default setting using the f or F button.
2
Press the SET (YES) button.
The setting returned to its factory default is saved in
memory as the current setting.
To return all settings to their factory
default settings
1
Press the MENU button in the menu control section.
The menu selection level display appears on the
monitor screen.
2
Press the G button to display level 1 of the setup menu.
3
Press the RESET (NO) button.
A message appears, to confirm whether or not you
wish to return all settings to their factory default
settings.
4
Press the SET (YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
Note
If you power off the unit while settings are being
saved, settings may not be correctly returned to their
factory default settings. Wait until the saving is
completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the
RESET (NO) button. The display returns to menu
level 1, leaving the settings unchanged.
Menu grade SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
TAPE PROTECTION
VIDEO CONTROL
AUDIO CONTROL
DIGITAL PROCESS
SETUP BANK OPERATION
MENU GRADE ENHAN
Time counter display
Monitor screen
Current setting
Level-1 menu display
Monitor screen message Message in the time
counter display
INITIALIZE ALL ITEMS TO
FACTORY PRESET
VALLUES? Init setup?