Nikon DSR-1500AP - Manual (Page 35)

35
Playback
C
h
apt
er 2
Rec
o
rding
a
nd Pla
y
b
a
c
k
Playback Procedure
Note
When controlling this unit from an editing control unit connected to the
REMOTE connector of this unit, set the LOCAL/REMOTE switch of this unit
to REMOTE, turning the REMOTE indicator on. When not, set the switch to
LOCAL, turning the indicator off.
1
Insert a cassette.
For details of cassette insertion see page 25, and for usable cassette types
see page 23.
The cassette is automatically drawn into the unit and the STOP button
lights. A few seconds later, if the STOP menu item under the AUTO EE
SELECT menu item (see page 60) is set to PB, a still image will appear on
the monitor screen.
2
Press the PLAY button.
This starts the playback operation. When the tape is played back all the way
to the end, the unit automatically rewinds it and then stops.
If the following indicators light when a cassette is loaded
Indicator It means:
Cassette memory indicator The loaded cassette contains a cassette memory.
CL indicator There is ClipLink log data stored in the cassette
memory on the loaded cassette.
NO EDIT indicator • The tape was recorded in the DV format, or a
DVCPRO tape is inserted.
You cannot use it as a recording tape for editing.
• The recording format selected on this unit is DV
(SP).
2
1
REW PLAY F FWD STOP REC
INPUT VIDEO AUDIO V:SDTI SDTI i.LINK SDI SG SDI SG SDI SG
ANALOG CH-1 1/2
AES/EBU
dB 0
-12
-20
-30
-40
-60
OVER
2 4 CH-
dB 0
-12
-20
-30
-40
-60
OVER
1 3 CH-
OUTPUT VIDEO AUDIO HOURS MINUTES SECONDS FRAMES SDI SDTI COMPOSITE S VIDEO Y-R,B
COMPOSITE S VIDEO Y-R,B
CH 1/2
CH 3/4 PB F S 48K 44.1K 32K
U-BIT
TC NO
CL
EDIT
REC INHI
REPEAT COUNTER
SERVO
REC MODE 2CH 4CH VITC EDIT MODE REMOTE 9P i.LINK
ANALOG CH-2 3/4
AES/EBU
LOCAL/
REMOTE switch