Using the soft keys – NEC UX5000 User Manual

Page 5

Using The Function Keys

Understanding the Ring/Message Lamp

A Quick Tour of

Your Terminal

Function Keys

●

To place or answer a call on your outside Line/Loop keys:

– Press a Line/Loop key to place or answer an outside call.
– Line/Loop keys flash red or green while ringing, are on steady red when busy.

With the DESI-Less terminals, the Line/Loop keys can be displayed on one of four display pages. To display the page
with the ringing line/loop, use the Scroll key to change pages (however, in most cases, you can simply lift the handset
to answer the call).

– Your line keys are normally located on the first two rows of Function Keys.

●

To make a Hotline key for a co-worker’s extension:

– Press CALL1+ Dial

851

+ Press Function Key + Hotline Code 01+ Dial co-worker’s extension number +

HOLD

to exit. (See the

Terminal Feature Handbook

for more Function Key types you can set up.)

●

To call or Transfer your call to a co-worker:

– While on the call, press the Hotline Key. (The key lights red while your co-worker is busy, flashes red if in DND.)
– If you’re not on a call, pressing the Hotline Key places an Intercom call to your co-worker.

●

To check your Function Key assignments:

– Press

CHECK

then the Function Key.

Soft Keys

– Use Soft Keys instead of dialing feature codes when handling your calls.

The Ring/Message Lamp

– Fast flash (red): A call is ringing your terminal.
– Fast flash (red): You have a message waiting.
– Lit solid (red): You left a message waiting on a co-worker’s terminal.

Using The Soft Keys

0913401_rev4-01d.qxd 6/9/08 10:43 AM Page 5