NEC UX5000 - Manual (Page 3)

Removing and Reinstalling the Faceplate
To remove the faceplate
(if installing a custom DESI label):
1. Put your finger in the recessed
area under the faceplate and lift
off the faceplate.
To reinstall the faceplate:
1. Remove the old label, then insert the
customized replacement DESI label.
2. Replace and press down on the
faceplate as shown.
3
Setting Up Your
Terminal
How To Use This Guide
When using the instructions in this user guide, you:
1 . Dial a digit on the key pad. For example:
– For line keys, dial #903 .
2 . Press a Programmable Function Key or Fixed Function Key. For example:
– Press CONF .
3 . Push a Soft Key. For example:
– Push Dir .
Service Codes and Program entries may vary depending on installation. You may want to check with your
Communications Manager.
See the next page for a quick tour of your terminal’s layout and keys.
0913401_rev4-01d.qxd 6/9/08 10:43 AM Page 3