Eizo ColorEdge CG232W - Manual (Page 6)

Connecting Cables
Note
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with a CG232W monitor, be sure to change the PC settings for
resolution and vertical frequency to those which are available for the CG232W monitor referring to
the resolution table (back of cover page) before connecting the PC.
Tips
• When connecting two PCs to the monitor, refer to the User’s Manual on the EIZO LCD Utility Disk
(CD-ROM).
1
Connect the monitor to the PC with a signal cable that matches the connectors.
(DVI-D/D-SUB)
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
Macintosh Windows
Macintosh Windows
Signal cable FD-C39 (supplied)
Signal cable MD-C87 (supplied)
Digital connection
Analog connection
or
Connectors
on the monitor
DVI-D connector
D-Sub mini 15-pin
connector
Connectors
on the PC
DVI connector
D-Sub mini 15-pin
connector
2
To use the SDI input signal, connect the BNC cable to the SDI input signal con-
nector and PC, or other video editing equipment.
The BNC cable is not included with this product. Please purchase it separately.
Connectors on the
monitor
Cable Connector on a PC or other
video editing equipment
BNC connector BNC cable BNC connector