Nikon HT1000 - Manual (Page 52)

E-52
SPECIFICATIONS
This section provides technical information about the HT1000 Projector's performance
Model Number HT1000
Optical
DMD™
Single Chip Digital Micromirror Device (DMD™)
Resolution 1024 ן768 pixels up to 1080p (1920ן1080) with Advanced AccuBlend
Lens Manual zoom and focus:
F2.5 – 2.8 f = 22.4mm – 27.0mm
Lamp 220 W DC standard
Image Size 30" – 200" (0.8 m – 5.08 m) diagonal (4:3)
40" – 200" (1.0 m – 5.08 m) diagonal (16:9)
Projection Distance 2.95ft – 24.93ft / 0.9m – 7.6m
Projection Angle 18.6° – 19.4°(wide) / 15.7° – 16.2°(tele)
Electrical
Inputs
1 RGB, 1 S-Video, 1 Video, 1 Component, 1 DVI digital, 1 PC Card, 4 Stereo Mini Audio, 1 PC Control
Outputs 1 SC.Trigger
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, Component: 1080p, 1080i, 720p, 576p, 480p, 576i, 480i
Scan Rate Horizontal: 15 kHz to 69 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 88 Hz
Video Bandwidth RGB: 100 MHz (-3dB)
Pixel Clock Freq Less than 100 MHz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H)
ן768 dots (V),
External Control RS232C, IR, LAN (wired)
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 2W ן2 (stereo)
Power Requirement 100 – 120V AC / 200 – 240V AC, 50 / 60 Hz
Input Current 3.2A (100 – 120V AC) / 1.6A (200 – 240V AC)
Power Consumption 290W (0.8W Standby)
Mechanical
Installation
Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 10.2" (W) ן3.6" (H)ן10.8" (D)
260mm (W) ן92mm (H)ן275mm (D)
(not including protrusions)
Net Weight 7.1 lbs / 3.2 kg
Environmental Considerations
Operational Temperatures :
41°F to 95°F (5°C to 35°C), 20% to 80% humidity (non-condensing)
Storage Temperatures :
14°F to 122°F (–10°C to 50°C), 20% to 80% humidity (non-condensing)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS3548 Class B
Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.nec-europe.com/
Global : http://www.nec-pj.com/
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
The specifications are subject to change without notice.