Playback 07, Playing cds and wma/mp3 discs, Playing video cd/super vcds – Pioneer RCS-LX60D User Manual
Page 93
Playback
07
93
En
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for
audio CDs
1
, and WMA/MP3 files.
Playing Video CD/Super VCDs
The table below shows the basic playback controls for
Video CD/Super VCDs.
Some discs feature Playback Control (PBC for short)
menus. These discs show PBC in the display when you
load them and display a menu on-screen from where you
can select what to watch.
2
Press to start playback.
Press to stop playback.
Pauses playback, or restarts playback
when paused.
Except WMA:
Press to start scanning.
Press again to increase the scanning
speed. (There are two scan speeds; the
current scan speed is shown on-screen.)
Press to skip to previous/next track (or
folder for WMA/MP3 disc). (During
playback you can also use the front panel
CH +/–
buttons.)
During playback, enter a track number
then press
ENTER
to skip directly to that
track.
Press
CLEAR
to clear a number entry and
start again.
Note
1 If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
will be output through the analog outputs. Also make sure that
STEREO
is selected using the
AUDIO
button (see
Switching audio channels
on page 99).
Press to start playback.
Video CD only:
If
RESUME
is displayed on-
screen, playback starts from the place last
stopped.
Press to stop playback.
Video CD only:
You can resume playback
from the same point by pressing
PLAY
.
(Press
STOP
again to cancel the
resume function.)
2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not available. You can play a PBC Video
CD/Super VCD in non-PBC mode by starting playback using the Disc Navigator (see
Using the Disc Navigator with playback-only discs
on
page 95).
PLAY
STOP
PAUSE
PREV
NEXT
SETUP
F.S.SURR
ADVANCED
SOUND
CLEAR
TEST TONE
SR+
/TUNE+
ENTER
/TUNE–
/ST–
/ST+
1
2
3
4
5
6
7
8
0
9
ENTER
PLAY
STOP
Pauses playback, or restarts playback
when paused.
Press to start scanning. Press repeatedly
to increase the scanning speed.
Press to skip to previous/next track.
When a PBC menu is displayed, press to
display the previous/next page. (During
playback you can also use the front panel
CH +/–
buttons.)
During playback, enter a track number
then press
ENTER
to skip directly to that
track.
Press
CLEAR
to clear a number entry and
start again.
While a PBC menu screen is displayed,
use to select numbered menu items.
Video CD in non-PBC mode only:
(Commercial back/skip)
Turn the
Smart Jog
counter-clockwise for
backward skip; turn clockwise for forward
skip. You can search up to two hours in
either direction.
While paused, press and hold to start
slow-motion playback. Press repeatedly to
change the playback speed (forward only).
While paused, press to advance a single
frame (forward only). You can also execute
frame-by-frame playback via the
Smart Jog
.
Press to display the disc menu of a Video
CD/Super VCD playing in PBC mode.
PAUSE
PREV
NEXT
SETUP
F.S.SURR
ADVANCED
SOUND
CLEAR
TEST TONE
SR+
/TUNE+
ENTER
/TUNE–
/ST–
/ST+
1
2
3
4
5
6
7
8
0
9
ENTER
CM SKIP
CM BACK
/
RETURN / EXIT
DVRLX60D_WV_EN.book 93 ページ 2007年4月24日 火曜日 午後7時58分