Pioneer RCS-LX60D - Manual (Page 148)

Additional information 16
148
En
Chapter 16
Additional information
Setting up the remote to control your TV
You can use the supplied remote to control your TV. To be
able to use this feature you first have to program the
remote with a maker code from the table on the following
page.
1 Switch on your TV.
2 Press and hold down the CLEAR button, then
enter the maker code for your TV.
See the table on the next page for the list of maker codes.
If there is more than one code given for your make, input
the first one in the list.
• If the maker’s name of your TV doesn’t appear in the
table, you will not be able to use this remote to
control your TV.
3 Point the remote towards your TV and press
TV to check that the remote works with your TV.
If the remote is set up correctly, the TV should switch off.
If it doesn’t and there is another code given for your
maker, repeat step
1 with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control
with your TV.
Button What it does
TV Press to switch the TV on/off (standby)
INPUT Press to change the TV’s video input
VOLUME +/– Use to adjust the TV volume
CHANNEL +/– Use to change TV channels
DVRLX60D_WV_EN.book 148 ページ ２００７年４月２４日 火曜日 午後７時５８分