Easy connections, Using the s-video or component video output, Connections 02 – Pioneer RCS-LX60D User Manual

Page 50: Coaxial hdmi out, Input 3, Output

Connections

Easy connections

The setup described below is a basic setup that allows
you to watch and record TV programmes, and play discs.
Other types of connections are explained starting on the
following page.

Important

• These connections use SCART cables (not supplied).

If your TV (or VCR) does not have a SCART
connection, and you want to use the supplied audio/
video cable, see

Basic connections

on page 10.

• The

AV1 (RGB)-TV

AV connector can output ordinary

(composite), S-video or RGB video, plus stereo
analog audio. The

AV2 (INPUT 1/DECODER)

connector accepts ordinary, S-video and RGB video
input, as well as stereo analog audio. See

AV1 Out

and

AV2/L1 In

on page 140 for how to setup these

options.

• Before making or changing any rear panel

connections, make sure that all components are
switched off and unplugged from the wall outlet.

Connect your TV antenna to the recorder and TV.

See

Connecting a TV antenna

on page 49 for details.

• If you want to incorporate a VCR in your setup, connect

before

the recorder (i.e., between the antenna wall

outlet and the antenna input on the recorder).

Use a SCART cable (not supplied) to connect the

AV1 (RGB)-TV

AV connector on this recorder to the

SCART AV connector on your TV.

Use another SCART cable to connect the

AV2

(INPUT 1/DECODER)

AV connector to a SCART AV

connector on your VCR.

Tip

• This recorder has a ‘through’ function which allows

you to record a TV programme from the built-in TV
tuner in this recorder while watching a video playing
on your VCR (To use this feature when the recorder is
in standby,

Power Save

must be set to

Off

— see

Power Save

on page 137).

Using the S-video or component
video output

If you can’t use the SCART AV connector to connect your
TV to this recorder, there are standard audio/video output

jacks, as well as an S-video and component video output.

Connect the S-video or component video output

to a similar input on your TV.

For an S-video connection, use an S-video cable (not
supplied) to connect the

S-VIDEO OUTPUT

jack to an S-

video input on your TV.

For a component video connection, use a component
video cable (not supplied) to connect the

COMPONENT

VIDEO OUT

jacks to a component video input on your TV.