PowerFile Active Archive Appliance A3 - Manual (Page 21)

Installing the Archive Engine 13
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
3. (Perform this step only if installing into a tapped hole rack) Remove the nut as shown using
supplied spanner
K
.
Note: This step starts the instructions for installing the outer rails.
Archive Engine Rail Assembly Close Up (Generation 1)
a
i
b
h
K
Left-hand assembly shown
Square hole rack
Front post rack Front post rack
Tapped hole rack
Remove this nut
if installing it
tapped hole rack
Use same screws
and washers on
front and rear posts