Philips DSR2010 User Manual

Page 23

DAY

TODAY OPERATION 23

6.8.1

Setting a timer from the banner

While watching TV or listening to the radio press
to display the banner.You have plenty of time to program
your TIMER for the NOW or NEXT programme.
- Press the button once to set a recording timer

on the current programme, i.e. programme instant
recording. Press again to cancel the timer.

6.8.2

Setting a timer from the EPG

- Press the button once to set a recorder on the

next programme. Press the button once again to
set a reminder on the next programme. Pres a
third time to cancel the timer.

Note: in case the channel broadcasting the programme you want

to set a timer on is locked, you will be prompted to enter
your password.

To edit a timer from the EPG:
- Move the focus to the desired programme and press the

button to access the Timer edition screen.

6.8.3

Deleting an active timer

A timer is active; recording is signalled by the front panel
LEDs lit respectively in red and orange.
To delete the active timer:
- If your receiver is in standby, press the front panel <+> or

<-> button or the remote control , , or
button, or any number button on the
remote control to wake it up.The orange LED turns
green.

- Press the key sequence + <0> to cancel the

active timer.The red LED then goes out and you can
change channels.

6.8.4

Your receiver is blocked with the front
panel LEDs lit respectively in red
and orange/green

Your receiver is blocked because a recording is running.
- Press successively then <0> to delete the

DSR2011_052005 17/05/05 14:52 Page 23