Philips DSR2010 User Manual

Page 16

16 CONNECTING YOUR DIGITAL

RECEIVER

lis

4.2

Connecting to your audio equipment (analogue or digital)

Depending on your audio equipment, you might have several options to connect your Digital-Receiver.

ANALOGUE CONNECTION (A)
Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio
equipment using a double CINCH cable (not supplied). Consult the user manual of your audio
equipment to locate the proper analogue audio inputs.

Note: with this connection set up you can control the volume (up/down and mute) using either your Digital-

Receiver or your audio equipment remote control.

DIGITAL CONNECTION (B)
Connect the audio “DIGITAL” output socket to the relevant digital audio input socket of your audio
equipment using a single CINCH cable (not supplied). Consult the user manual of your audio
equipment to locate the proper digital audio input.

Note: with this connection set up you can only control the volume (up/down and mute) using your audio

equipment remote control; refer to the user manual of your audio equipment.

4.3

Connecting to a video projector to watch Digital TV

Connect the “TV” SCART socket of your Digital-Receiver to your video projector.
Video projectors are often fed with S-Video format video signals. If this is the case with your
projector, follow the instructions below for connection and installation:
- Connect a SCART/S-Video adapter to the “TV” SCART of your receiver (not supplied), and

connect the adapter to the S-Video input of your video projector by means of a S Video cable.

- Installation: refer to chapter 11.5.2 to change the “TV/VCR output” setting of your Digital-Receiver

to S-VIDEO/PAL-CVBS.

DSR2011_052005 17/05/05 14:52 Page 16