Panasonic KX-FP101AL - Manual (Page 87)

87
Receiving Faxes
Fax/Copy
This feature allows your unit to call your pager when your unit receives a fax document and/or incoming voice
message.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “ON”.
● If this feature is not required, select “OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP
Your pager
number
Pauses
Your pager access
code, if required.
NO.=
START/SET/COPY
MODE=ON ▼▲
MODE=OFF ▼▲
START/SET/COPY
PAGER CALL
7 0
1.SYSTEM SET UP
MENU
How your unit and pager work
When your unit receives
a fax document and/or
incoming voice message,
it will call your pager
company. Your pager
company will
call your pager. A few minutes later, your pager will beep and
display as follows;
— “11” : when your unit received a voice message.
— “22” : when your unit received a fax document.
● If you have subscribed to a Caller ID service and
the Caller ID information (telephone number) is
received, your pager will display the telephone
number before the number “11” or “22”.
Pager
company
Pager
2 2
Example:
Your unit received
a fax document.
7 Press .
● The unit will dial the stored pager number.
8 Check that your pager receives a pager
test call.
9 Press .
If the AUTO ANSWER light is off, turn it
on by pressing
. AUTO ANSWER
DIGITAL SP-PHONE
PAGER TEST
START/SET/COPY
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
MENU
REDIAL/PAUSE
(Pause)
/
ON
AUTO ANSWER
TAD/FAX ON
DIGITAL SP-PHONE
10
■ For KX-FP121/KX-FM131