09 playing and recording from a dv camcorder, Playing from a dv camcorder, Recording from a dv camcorder – Pioneer DVR-550HX-S User Manual
Page 84: Playing and recording from a dv camcorder, Playing and recording from a dv camcorder 09, Chapter 9, Recording from a dv, Camcorder
Playing and recording from a DV camcorder
09
84
En
Chapter 9
Playing and recording from a
DV camcorder
You can play back and record video from a
DV camcorder connected to the
DV IN
jack
on the front panel of this recorder.
Important
• If you connect a second recorder using a
DV cable, you cannot control the second
unit from this one.
• You can’t control this unit remotely from
a component connected to the
DV IN
jack.
Playing from a DV camcorder
1
Make sure your DV camcorder is
connected to the front panel DV IN jack.
2
From the Initial Setup menu, check
that the DV audio input is setup as you
would like.
See
DV Input
on page 128 for more on this.
• Check also that the
Audio In
settings for
External Audio
and
Bilingual
Recording
are as you want them (see
Audio In
on page 127).
3
Select ‘DV’, then ‘DV Video
Playback’ from the Home Menu.
4
Start playback on the camcorder.
Images from the camcorder should appear
on your TV.
• To record the incoming video, press
HDD/DVD
to select the HDD or a DVD
for recording, then press
ì
REC
. Press
STOP REC
to finish recording.
If there is no signal from the device
connected to the DV jack, or the signal is
copy-protected, recording will pause. It
will automatically restart once there is a
recordable signal.
• The recorder will only start recording
from the
DV IN
jack if there is a valid
signal. Recording will pause if the signal
is interrupted during recording.
• If your source is copy-protected using
Copy Guard, you will not be able to
record it. See
Restrictions on video
recording
on page 60 for more details.
Recording from a DV
camcorder
• The source signal must be DVC-SD
format.
• You can’t record date and time
information from DV cassette.
• During DV recording, if a part of the tape
is blank, or has copy-protected material
on it, this recorder will pause recording.
Recording will restart automatically
when there is a recordable signal.
However, if there is more than two
minutes of blank tape, this recorder will
stop recording and the camcorder
should stop (depending on the
camcorder).
Copying from a DV source
Using the recorder’s remote, you can control
both the camcorder and this recorder.
Important
• Some camcorders cannot be controlled
using this recorder’s remote.
• For best results when recording from a
DV camcorder to this recorder, we
recommend cueing the camcorder to
the place you want to start recording
from and setting the camcorder to
play-pause.
HOME MENU
DVR550HXS_WV_EN.book 84 ページ ２００７年３月３０日 金曜日 午前１０時４８分