beautypg.com

Connecting an external decoder box (1), Connections 02, Connecting an external – Pioneer DVR-550HX-S User Manual

Page 18: Decoder box (1), Coaxial hdmi out, Input 3, Output

background image

Connections

02

18

En

1

Connect RF antenna cables as shown.

See

Connecting a TV antenna

on page 15 for

more on RF antenna connections, including
from this recorder to your TV.

2

Use a SCART cable (not supplied) to

connect the AV1 (RGB)-TV AV connector
to a SCART AV connector on your TV.

This enables you to watch discs.

3

Use another SCART cable to connect

the AV2 (INPUT 1/DECODER) AV
connector to a SCART AV connector on
your cable box/satellite receiver.

This enables you to record scrambled TV
channels.

4

Plug the supplied G-LINK™ cable to

the G-LINK™ jack.

This enables you to control the tuner in the
external receiver using the GUIDE Plus+®
system.

Position the IR transmitter end of the
G-LINK™ cable so that the IR receiver on
your cable/satellite receiver will pick up the
control signals (see diagram).

See the manual that came with your cable/
satellite receiver if you’re not sure where the
IR receiver is on the front panel.
Alternatively, experiment with the remote
control, operating it from very close range
until you find the place where the receiver
responds.

Tip

• This recorder has a ‘through’ function

which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby,

Power

Save

must be set to

Off

— see

Power

Save

on page 122).

Connecting an external

decoder box (1)

If you have an external, dedicated decoder
box for your satellite or cable TV system, use
the setup described on this page. See above
for how to connect the G-LINK™ cable.

Important

• Do not connect your decoder box directly

to this recorder.

• Information from the decoder (for

example, relating to pay TV services), is
only viewable when this recorder is off
(in standby).

• For timer recording to work properly on

this recorder, the VCR/satellite receiver/
cable box must also be switched on
during recording.

AC IN

DIGITAL

AUDIO OUT

COAXIAL

HDMI OUT

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

S-VIDEO

VIDEO

AUDIO

L

R

INPUT 3

COMPONENT VIDEO OUT

Y

P

B

P

R

ANTENNA

IN

OUT

ANTENNA(DIGITAL)

IN

OUT

5 V

30 mA

OUTPUT

TV

Satellite dish/
antenna/cable TV
wall outlet

Cable/Satellite
receiver

To recorder's

antenna input

1

2

3

To SCART AV

connector

AV2 (INPUT 1/

DECODER)

AV1 (RGB) - TV

From antenna output

To antenna input

4

From SCART AV

connector

CONTROL

G-LINK

IN

AV 1 (RGB) – TV

AV 2 (INPUT 1/DECODER)

S-VIDEO

O

INPUT 3

OUTPUT

G-LINK cable

DVR550HXS_WV_EN.book 18 ページ 2007年3月30日 金曜日 午前10時48分