Pioneer DVR-550HX-S - Manual (Page 122)

The Initial Setup menu 16
122
En
Chapter 16
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
• Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting Options Explanation
Basic
Clock Setting Auto Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual • If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
• If any digital TV channels are set then the clock will automatically be set.
• The clock must be set in order to use timer recording.
Input Line System 525 System Use for NTSC or PAL-60 recording from an external
input.
625 System • Use for standard PAL or SECAM recording.
• This setting is applicable only when recording from an external input.
• See also About the input line system on page 135 for more information on this setting.
Power Save Mode 1 Only signals arriving at the antenna input are passed
through to the antenna output when the recorder is
in standby.
Mode 2 No input signals are passed through to the outputs
when the recorder is in standby.
Off • When the recorder is in standby, all signals arriving
at the SCART and antenna inputs are passed along
to the outputs.
HELP Setting On • Switches on the automatic Help screens for GUI
displays.
Off Switches off the automatic Help screens for GUI
displays. (Press
HELP on the remote to manually
display the Help screen.)
DVR550HXS_WV_EN.book 122 ページ ２００７年３月３０日 金曜日 午前１０時４８分