Philips CF-U1 - Manual (Page 23)

23
Battery Power
You can attach 2 batteries packs to this com-
puter. The battery indicators are prepared for
each battery.
A : Battery 1 indicators
B : Battery 2 indicators
Battery Indicator
Battery indicator Battery status
Not lit The battery pack is not inserted or not being charged.
• You can check presence of the battery pack by pressing Fn + F ( ) *1 ( Î page
25 )
*1 For Numeric keyboard model : Fn + 9 ( )
Orange Charging is in progress.
Green The battery is fully-charged.
Blinking green When you attach the battery cover with the battery pack already inserted:
• You can check the battery level by blinking times
Except for the operations stated above:
In high temperature mode, the battery pack is discharging the power to 80%
*2
of normal
temperature mode ( Î page 26 ).
Do not remove the battery pack since the power is not supplied even if you connect the
AC adaptor in this mode. If remove the battery pack, the computer will be turned off and
lose data.
*2 In high temperature mode, the 100% battery level is equivalent to 80% level of the normal
temperature mode.
Red The remaining battery is approximately 9% or less.
B A A B
5 times 95 % to 100 %
50 % to 94 %
25 % to 49 %
5 % to 24 %
0 % to 4 %
4 times
3 times
2 times
1 time
Blinking times Battery level