Philips CF-30FTSAZAM - Manual (Page 55)

7-34
■ Preparation oh HDD ASSY
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Fit to the corner.
Turn it to the board side (back side).
HDD INS SHEET
HDD TAPE S
Safety Working
Insert the HDD FPC Ass'y
Connect the Connector
Valley Fold
Mountain Fold
1. Do not gouge when inserting and removing the socket.
2. Do not drop HDD or add any impacts on it.
3. Insert CN into the end firmly.
4. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Do not bend the bending
part of Heater
Attach it pushing the shaded
part not to push the fuse.
PET TAPE
HEATER FIXED
TAPE Center
HEATER
CAUTION S1:Insulation S2:Pinching Cables S3:Sharp Edge
S4:Part No. Check S5:Others
S4